Commercial epoxy flooring has to survive forklifts, wash-downs, dropped stock and inspection. It also has to go in without shutting a business down for a week.
We coat warehouses, service bays, seafood and food processing floors, kitchens, retail spaces and light manufacturing across the CBRM and out along the Trans-Canada.
Call +1 782-201-4554 to arrange a site visit. Commercial work is always quoted after we have walked the floor.
Warehouses and distribution space around the Sydney Port Access Road and Grand Lake Road. Automotive service bays and tyre shops. Seafood processing floors, which need a surface that takes constant water and cleaning.
Restaurant and hotel kitchens through Sydney and North Sydney, including places running on cruise ship and ferry traffic. Retail floors, showrooms, breweries and light manufacturing.
Also municipal and institutional work: mechanical rooms, workshops, storage areas and equipment bays.
Scale changes the method. Large floors get ride-on grinders and a crew, and the work runs in sections so part of the floor stays usable.
Specification matters more. Coating thickness, slip rating and chemical resistance are chosen against what the floor actually meets, whether that is fish brine, hydraulic oil, sugar or kitchen degreaser.
Scheduling is part of the quote. Nights, weekends and shutdown windows are normal. So is coordinating with your other trades, so we are not grinding while someone is running cable.
Aisle lines, walkways, hatching, no-go zones and equipment outlines all go in as part of the coating rather than as tape or paint on top. They wear at the same rate as the floor.
Yellow aisle marking and pedestrian crossings are the common request in warehouse space. Colour coding whole areas works well where a floor has separate clean and dirty zones.
Bring us your layout, or we will mark it out with you on the floor before the top coat goes down.
Any floor that gets wet gets aggregate in the top coat. In a seafood processing room or a kitchen that is not optional, and we spec the level against how the room is cleaned.
Coving at the wall junction lets a floor be hosed without water getting behind the coating. Drains get the coating carried into them properly rather than stopping short.
We can supply the specification in writing if your insurer or an inspector asks for it.
A small unit is two to three days. A large warehouse runs in phases across a week or more, with each phase back in use as it cures.
Polyaspartic shortens everything. Where a floor has to reopen the next morning, that is the system to use, and we price it that way.
We give you a schedule with the quote, including which areas are out of action on which day.
Call +1 782-201-4554 and we will come and look at the floor. Free site assessment, written specification, and a fixed price with a schedule attached.
Cape Breton Epoxy Flooring installs these systems for homes and businesses across the island.
Flake epoxy flooring is the system most garages and basements on this island end up with. An epoxy base coat goes down, vinyl chips are broadcast into it while it is wet, and a clear top coat seals the lot.
View Flake Epoxy Flooring
A garage floor coating seals the slab so salt, brine and water stop soaking into it. On Cape Breton that is the difference between concrete that lasts and concrete that flakes apart near the door.
View Garage Floor Coating
Polyaspartic floor coating is a fast-curing resin that goes down in colder temperatures than epoxy and does not yellow in sunlight. On an island with a long cold season and a short good-weather window, that matters.
View Polyaspartic Floor Coating
A coated basement floor turns a cold, dusty slab into a room you use. It seals the concrete, it stops the dust, and it does not trap moisture the way carpet and underlay do.
View Basement Floor Coating
Concrete floor coating covers everything a bare slab can be turned into: garage, basement, porch, patio, workshop, mechanical room or shop floor. Same principle every time, different system depending on what the floor meets.
View Concrete Floor CoatingCost, cure times, winter installs and moisture testing are all covered on the questions page.
Tell us the room, the rough size and how it gets used, and we will come and price it. Prefer to talk it through? Call +1 782-201-4554.
